Handan Shengnada New Material Technology Co., Ltd.
SND FOUNDRY, YOUR RELIABLE PARTNER IN SIDE!
Add to Cart
Double Flanged Eccentric Taper DI Double Flanged Flat Taper Reducer
Product description
A double flanged taper is a pipe fitting that is used to connect two pipes of different sizes. It is a type of taper fitting that has flanges on both ends. The flanges allow the fitting to be connected to other pipe fittings or equipment using bolts or welding.
It is consists of the following parts:
Body: The body is the main part of the fitting. It is made of a strong and durable material, such as steel, cast iron, or ductile iron.
Flanges: The flanges are the circular plates that are welded or bolted to the body. They are typically made of the same material as the body.
Taper: The taper is the gradual change in diameter between the two ends of the fitting.
Double flanged tapers are used in a variety of applications, including:
Water and wastewater treatment: Double flanged tapers are used to connect pipes in water and wastewater treatment plants.
Chemical and petrochemical plants: Double flanged tapers are used to connect pipes in chemical and petrochemical plants.
Oil and gas production: Double flanged tapers are used to connect pipes in oil and gas production facilities.
When selecting a double flanged taper, it is important to consider the following factors:
Pipe sizes: The fitting must be the same size as the pipes that it will be connecting.
Flow rate: The fitting must be able to handle the flow rate of the fluid that will be flowing through it.
Pressure rating: The fitting must be able to withstand the pressure of the fluid that will be flowing through it.
Product details
| 1 | Type: | Tyton (push on) Socket Pipe Fitting |
| Flanged Pipe Fitting | ||
| K type Bolted Gland Pipe Fitting | ||
| Mechanical Joint Pipe Fitting | ||
| Ductile Iron Pipe Fitting for PVC Pipe | ||
| 2 | Standard: | ISO2531, EN545, EN598, BS4772, EN12842, AWWA C110, AWWA C153, etc |
| 3 | Size: | DN50-DN2000(2"-80") |
| 4 | Pressure: | PN10, PN16, PN25, PN40 |
| 5 | Pipe Ends | Spigot, socket or flanges. |
| 6 | Application | Municipal Use, Waterworks Pipelines, Piping Fittings, Water Engineering, Potable Water Use, Irrigation Use, Water Supply Project Use, Water Treatment Plants Use, Pumping Stations, Water Utility Sectors, Water-Supply Pressure Pipeline, Potable Water Pumping Station, Stormwater Lines, Fire Water Pumping Station, Fresh Water Pumping Station, ect. |
| 7 | Internal Coating: | a). Portland cement mortar lining |
| b). Sulphate Resistant cement mortar lining | ||
| c). High-Aluminum cement mortar lining | ||
| d). Fusion bonded epoxy coating | ||
| e). Liquid epoxy painting | ||
| f). Black bitumen painting | ||
| 8 | External Coating: | a). Zinc + bitumen painting |
| b). Fusion bonded epoxy coating | ||
| c). Zinc-aluminum alloy + liquid epoxy painting | ||
| 9 | Accessories: | Rubber rings & Gaskets : SBR or EPDM Bolts & Nuts : Galvanized carbon steel G4.8/G8.8, or SS304/SS316 |
| 10 | Packing: | Wooden case/pallet with plastic layer, or as per customer's requirements. |
Dimensions of Double Flanged Eccentric Taper
| N | dn | L | Mass (kg) | standard | |||
| PN10 | PN16 | PN25 | PN40 | ||||
| 50 | 40 | 150 | 5.1 | 5.1 | 5.1 | 5.1 | ISO2531/EN545 |
| 60 | 50 | 130 | 6.1 | 6.1 | 6 | 6 | |
| 65 | 40 | 200 | 6.7 | 6.7 | 6.6 | 6.6 | |
| 65 | 50 | 170 | 6.9 | 6.9 | 6.8 | 6.8 | |
| 65 | 50 | 200 | 6.7 | 6.7 | 6.6 | 6.6 | ISO2531/EN545 |
| 80 | 32 | 200 | 5.5 | 5.5 | 5.5 | 5.5 | |
| 80 | 40 | 200 | 6.3 | 6.3 | 6.3 | 6.3 | |
| 80 | 50 | 150 | 6.5 | 6.5 | 6.5 | 6.5 | |
| 80 | 50 | 170 | 7.3 | 7.3 | 7.3 | 7.3 | |
| 80 | 50 | 200 | 7.3 | 7.3 | 7.3 | 7.3 | |
| 80 | 60 | 170 | 7.7 | 7.7 | 7.6 | 7.6 | |
| 80 | 60 | 200 | 7.5 | 7.5 | 7.4 | 7.4 | ISO2531/EN545 |
| 80 | 65 | 150 | 7.5 | 7.5 | 7.4 | 7.4 | |
| 80 | 65 | 170 | 8.1 | 8.1 | 8 | 8 | |
| 80 | 65 | 200 | 7.9 | 7.9 | 7.8 | 7.8 | ISO2531/EN545 |
| 100 | 50 | 100 | 6.9 | 6.9 | |||
| 100 | 50 | 150 | 7.9 | 7.9 | 8.4 | 8.4 | |
| 100 | 50 | 170 | 8.1 | 8.1 | 8.6 | 8.6 | |
| 100 | 50 | 200 | 9 | 9 | 9.5 | 9.5 | |
| 100 | 50 | 300 | 9.4 | 9.4 | 9.9 | 9.9 | |
| 100 | 60 | 170 | 8.4 | 8.4 | 8.8 | 8.8 | |
| 100 | 65 | 170 | 8.8 | 8.8 | 9.2 | 9.2 | |
| 100 | 65 | 200 | 9.4 | 9.4 | 9.8 | 9.8 | |
| 100 | 80 | 150 | 8.8 | 8.8 | 9.3 | 9.3 | |
| 100 | 80 | 170 | 9.2 | 9.2 | 9.7 | 9.7 | |
| 100 | 80 | 195 | 9.3 | 9.3 | 9.8 | 9.8 | EN545-B |
| 100 | 80 | 200 | 9.3 | 9.3 | 9.8 | 9.8 | ISO2531/EN545 |
| 125 | 60 | 200 | 10.4 | 10.4 | 11 | 12.2 | |
| 125 | 60 | 400 | 14 | 14 | 14.6 | 15.8 | |
| 125 | 65 | 200 | 10.7 | 10.7 | 11.3 | 12.5 | |
| 125 | 80 | 170 | 10.5 | 10.5 | 11.1 | 12.4 | |
| 125 | 80 | 200 | 11.1 | 11.1 | 11.7 | 13 | |
| 125 | 80 | 300 | 13 | 13 | 13.6 | 14.9 | |
| 125 | 100 | 150 | 10.9 | 10.9 | 11.5 | 12.8 | |
| 125 | 100 | 170 | 11.3 | 11.3 | 12.5 | 13.8 | |
| 125 | 100 | 200 | 11.3 | 11.3 | 12.5 | 13.8 | ISO2531/EN545 |
| 150 | 50 | 170 | 10.8 | 10.8 | 11.8 | 13.9 | |
| 150 | 60 | 200 | 12.3 | 12.3 | 13.3 | 15.4 | |
| 150 | 60 | 300 | 14 | 14 | 15 | 17.2 | |
| 150 | 65 | 200 | 12.6 | 12.6 | |||
| 150 | 65 | 300 | 14.3 | 14.3 | |||
| 150 | 80 | 150 | 11.5 | 11.5 | 12.5 | 14.6 | |
| 150 | 80 | 170 | 11.9 | 11.9 | 12.9 | 15 | |
| 150 | 80 | 200 | 13 | 13 | 14 | 16.1 | |
| 150 | 80 | 260 | 13.9 | 13.9 | 14.9 | 17 | |
| 150 | 80 | 400 | 16.4 | 16.4 | 17.4 | 19.5 | |
| 150 | 100 | 150 | 12.5 | 12.5 | 14 | 16.1 | |
| 150 | 100 | 170 | 12.7 | 12.7 | 14.2 | 16.3 | |
| 150 | 100 | 200 | 13.5 | 13.5 | 15 | 17.1 | |
| 150 | 100 | 220 | 14.5 | 14.5 | 16 | 18.1 | |
| 150 | 100 | 300 | 15.3 | 15.3 | 16.8 | 18.9 | |
| 150 | 125 | 150 | 13 | 13 | 14.6 | 18 | |
| 150 | 125 | 170 | 13.9 | 13.9 | 15.5 | 18.8 | |
| 150 | 125 | 200 | 14 | 14 | 15.6 | 18.9 | ISO2531/EN545 |
| 200 | 80 | 200 | 16.5 | 16.3 | 18.4 | 23.7 | |
| 200 | 80 | 270 | 17.7 | 17.5 | 19.6 | 24.9 | |
| 200 | 80 | 300 | 19 | 18.8 | 20.9 | 26.2 | |
| 200 | 80 | 600 | 26.5 | 26.7 | 28.8 | 34.1 | |
| 200 | 100 | 200 | 18 | 17.8 | 20.4 | 25.7 | |
| 200 | 100 | 270 | 18.6 | 18.4 | 21 | 26.3 | |
| 200 | 100 | 300 | 23 | 22.8 | |||
| 200 | 100 | 330 | 20.3 | 20.1 | 22.7 | 28 | |
| 200 | 100 | 600 | 27.7 | 27.5 | 30.1 | 35.4 | |
| 200 | 125 | 270 | 20.1 | 19.9 | 22.6 | 29.2 | |
| 200 | 125 | 300 | 22 | 21.8 | |||
| 200 | 150 | 200 | 20.2 | 20 | 23.1 | 30.5 | |
| 200 | 150 | 235 | 21 | 20.8 | 23.9 | 31.3 | EN545-B |
| 200 | 150 | 270 | 21.8 | 21.6 | 24.7 | 32.1 | |
| 200 | 150 | 300 | 22 | 21.8 | 24.6 | 32 | ISO2531/EN545 |
| 250 | 80 | 250 | 23.7 | 23.3 | 27.2 | 37.3 | |
| 250 | 100 | 200 | 21.7 | 21.4 | 25.8 | 35.8 | |
| 250 | 100 | 270 | 23.7 | 23.4 | 27.8 | 37.8 | |
| 250 | 100 | 300 | 24.9 | 24.6 | 29 | 39 | |
| 250 | 100 | 600 | 37.8 | 37.5 | 41.9 | 51.9 | |
| 250 | 125 | 270 | 25.1 | 24.8 | 29.3 | 40.7 | |
| 250 | 150 | 200 | 26 | 25.7 | 30.7 | 42.9 | |
| 250 | 150 | 270 | 26.8 | 26.5 | 31.5 | 43.7 | |
| 250 | 150 | 300 | 29 | 28.7 | |||
| 250 | 150 | 345 | 29.8 | 29.5 | 34.5 | 46.7 | |
| 250 | 150 | 600 | 38.3 | 38 | 43 | 55 | |
| 250 | 200 | 200 | 27 | 26.9 | 32.9 | 48.3 | |
| 250 | 200 | 270 | 30.3 | 29.8 | 35.8 | 51.2 | |
| 250 | 200 | 300 | 30 | 29.5 | 35.5 | 51 | ISO2531/EN545 |
| 300 | 80 | 270 | 28.6 | 28.3 | 33.9 | 49.4 | |
| 300 | 80 | 600 | 41.7 | 41.3 | 46.9 | 62.4 | |
| 300 | 100 | 200 | 28 | 27.7 | 33.8 | 49.3 | |
| 300 | 100 | 270 | 29.5 | 29.5 | 35.6 | 51.1 | |
| 300 | 150 | 200 | 30 | 29.7 | 36.3 | 53.9 | |
| 300 | 150 | 270 | 32.6 | 32.3 | 38.9 | 56.5 | |
| 300 | 150 | 600 | 46.3 | 46 | 52.6 | 70.2 | |
| 300 | 200 | 200 | 33.5 | 31 | 38.7 | 59.5 | |
| 300 | 200 | 270 | 36.1 | 35.5 | 43.2 | 64 | |
| 300 | 200 | 300 | 38.6 | 38 | |||
| 300 | 200 | 600 | 52 | 51.5 | 59.2 | 80 | |
| 300 | 250 | 150 | 34.8 | 34 | 43.5 | 69 | |
| 300 | 250 | 200 | 37 | 36.3 | 45.8 | 71.4 | |
| 300 | 250 | 270 | 40.7 | 40 | 49.5 | 75.1 | |
| 300 | 250 | 300 | 42.2 | 41.5 | 51 | 76.6 | ISO2531/EN545 |
| 350 | 200 | 270 | 40.8 | 43.3 | 53.7 | ||
| 350 | 200 | 600 | 58.4 | 60.9 | 71.3 | ||
| 350 | 250 | 270 | 45.2 | 47.6 | 59.8 | ||
| 350 | 250 | 600 | 64.6 | 67 | 79.2 | ||
| 350 | 300 | 200 | 45.4 | 48.5 | 62.4 | ||
| 350 | 300 | 270 | 49.9 | 52.8 | 66.7 | ||
| 350 | 300 | 300 | 51.9 | 54.8 | 68.7 | ISO2531/EN545 | |
| 400 | 200 | 270 | 46.9 | 51.2 | 64.6 | ||
| 400 | 200 | 300 | 48.9 | 53.2 | 66.6 | ||
| 400 | 200 | 600 | 66.7 | 71 | 84.4 | ||
| 400 | 250 | 270 | 51.2 | 55.4 | 70.6 | ||
| 400 | 250 | 300 | 53.2 | 57.4 | 72.6 | ||
| 400 | 250 | 600 | 72.8 | 77 | 92.2 | ||
| 400 | 300 | 270 | 56.3 | 60.5 | 77.4 | ||
| 400 | 300 | 300 | 58.8 | 63 | 79.9 | ||
| 400 | 300 | 600 | 80.5 | 85 | 101.9 | ||
| 400 | 350 | 270 | 60.2 | 67.4 | 87 | ||
| 400 | 350 | 300 | 62.7 | 69.9 | 89.5 | ISO2531/EN545 | |
| 450 | 200 | 270 | 54.6 | 62.4 | 75 | ||
| 450 | 200 | 600 | 79.3 | 87 | 99.6 | ||
| 450 | 250 | 270 | 57.4 | 65 | 79.4 | ||
| 450 | 250 | 600 | 79.9 | 87.5 | 102 | ||
| 450 | 300 | 600 | 87.4 | 95 | 111 | ||
| 450 | 400 | 270 | 71.2 | 83.6 | 105 | ||
| 450 | 400 | 300 | 74.2 | 86.5 | 108 | ISO2531/EN545 | |
| 500 | 100 | 700 | 94.6 | 107.7 | 119.4 | ||
| 500 | 250 | 700 | 100.9 | 114 | 130 | ||
| 500 | 300 | 600 | 103.5 | 116.6 | 134 | ||
| 500 | 350 | 600 | 104.9 | 121 | 141 | ||
| 500 | 400 | 570 | 114.8 | 132.7 | 155.7 | ||
| 500 | 400 | 600 | 118.3 | 136.2 | 159.2 | ISO2531/EN545 | |
| 500 | 450 | 300 | 83 | 104 | 126 | ||
| 600 | 400 | 570 | 140.2 | 168.4 | 194 | ||
| 600 | 400 | 600 | 144.3 | 172.5 | 198 | ||
| 600 | 450 | 600 | 143.4 | 175 | 200 | ||
| 600 | 500 | 570 | 160.6 | 194.7 | 220.6 | ||
| 600 | 500 | 600 | 164.7 | 198.8 | 224.7 | ISO2531/EN545 | |
| 700 | 400 | 800 | 204 | 220 |
Other ductlie iron pipe fittings show